![]() ![]() Input should match the source, and output should match the sensitivity of the host. Check that the input and output levels are set correctly.If you experience high audible distortion or low output volume: Check that the fuse is functioning correctly.Check power wire is correctly connected and have the appropriate potential (11- 16 volts).Check and make sure that B+ and GND are not reversed.Troubleshooting Guideį the unit does not turn on and the power indicator LED is NOT illuminated, start with this: Factory settings usually work just fine we recommend you try that first. You may change these jumpers to higher or lower settings to maximize your bass output and protect your speakers. ![]() The Bass Maximizer circuit can either increase or decrease the signal voltage to your liking.
0 Comments
Leave a Reply. |